If you want more information on how to burn right and using your stove or fire correctly, here is a useful guide for how to heat your home with a solid fuel stove, from checking if you live in a smoke control area to the importance of using good quality fuel in an Ecodesign stove or fire.
The right fuel and right product for domestic heating will not only get the most from your stove or fire, but will also support the Clean Air Strategy in its aims to reduce emissions.
If you live in a town or city, there is a good chance you live in a Smoke Control Area. In a Smoke Control Area, you can only use Defra-exempt appliances to burn solid fuel, or if you do not have an approved appliance, you can only burn authorised smokeless fuels.
Stovax offers a large collection of wood burning and multi-fuel stoves that are DEFRA-exempt for use in Smoke Control Areas. Find your new approved appliance by browsing our solid fuel stoves and fires.
One of the best ways to help our environment when it comes to burning solid fuel is to consider the appliance you are using to burn your fuel. It is widely recognised that old stoves and fires are vastly less efficient when compared to modern, clean burning appliances such as an Ecodesign Ready stove.
If you are using an open fire or older stove to heat your home, you may wish to consider replacing it with a clean burning, high efficiency model that produces less emissions.
Some stoves are not only approved for use in smoke control areas, but are also Ecodesign Ready. An Ecodesign Ready stove burns so cleanly it meets, and in many cases exceeds, future 2022 environmental standards. Crucially, an Ecodesign Ready stove keeps emissions to an absolute minimum.
Stovax stands in support of the Government’s Clean Air Strategy, and updating an old fireplace is a good place to start. We recommend updating to a DEFRA-approved or Ecodesign Ready stove or fire – you can read more about the benefits of Ecodesign Ready stoves on our website, and find out more about the Clean Air Strategy here.
Poor quality wood tends to have a high moisture content. When wet wood is burnt, a large amount of the heat energy created by the fire is wasted burning off the excess water, and results in poor combustion. Aside from wasting energy, burning wet wood results in the production of tars and creosote, which can damage a flue and increase the risk of chimney fires.
It is easy to identify quality firewood by looking for the Woodsure ‘Ready to Burn’ label. Using good wood can reduce emissions by 50%, and when burnt in an Ecodesign stove can help to reduce emissions.
All flue systems and stoves need to be maintained so that you can get the best from your appliance.
Your chimney must be swept at least once a year, because chimneys need a clear passageway for combustion gases to exit your home. Obstructions, soot, deposits and tar can all build up in your flue over time which can make your stove run less efficiently.
Likewise, your stove needs to be regularly serviced by a HETAS installer to ensure safe use and optimum efficiency.
It is important that your efficient heating appliance has a consistently insulated chimney to be able to perform efficiently. Installation should only be carried out by a competent installer. Find a list on the HETAS website.