Traditional Stoves
Traditional Stoves
Contemporary Stoves
Contemporary Stoves
Choosing the right stove
Hearth Mounted Fires
Hearth Mounted Fires
Inset Fires
Built-in Fires
Wall Mounted Fires
Wall Mounted Fires
Freestanding Fires
Freestanding Wood Burning Fires
Choosing the right fire
Inset Gas Fire Builder
Mix & Match Inset Gas Fire Builder
Traditional Fireplaces
Traditional Fireplaces
Contemporary Fireplaces
Contemporary Fireplaces
Mantels
Mantel
Choosing the right fireplace
Made to Measure Gas Fires

Made to Measure Gas Fires

Gazco offers a comprehensive made-to-measure service for living flame gas fires. A range of sizes and shapes are supplied with Gazco's fuel effects. This makes them ideal for everything from a small Victorian cast iron fireplace in a bedroom to a large centrepiece in a pub or restaurant.

Gazco made-to-measure log-effect fire at Langs Hotel, Glasgow

Gazco made-to-measure Antique Grate

Superb custom-built gas fires are ideal for achieving the convenience of a gas fire in an original fireplace, or for creating a large centrepiece in pubs, restaurants, hotels and other public places.

Your custom-built fire can be controlled with an easy-to-use manual control, or upgrade to a Command remote system for ultimate convenience.

  • Conventional flue
  • Natural gas or LPG versions available
  • Heat output – around 2.5kW depending on model
  • Adjustable flame setting
  • Reduced draught versions

Features of our superb custom-built radiant gas fires include:

  • Simple, multi-purpose manual control knob – for fingertip control of ignition, pilot light and gas supply
  • Upgradeable to Command remote control system
  • Adjustable flame setting – variable between high and low to suit your mood
  • Piezo ignition – automatic sparking without batteries or mains electricity
  • Flame failure device – automatically shuts off the gas supply if the pilot light goes out
  • Oxygen sensitive safety pilot – automatically shuts off the gas supply if the oxygen level in your room falls below a safe level
  • Reduced Draught versions – no additional ventilation required
  • Conventional Flue fires
  • Natural Gas or LPG – versions available for both types of gas
  • Heat outputs – around 2.5kW depending on model

The minimum and maximum sizes for made-to-measure gas fires are as follows:

Dimensions – with Manual Control

Coals Logs
Min Max Min Max
Width (mm) 165 610 230 840
Depth (mm) 130 319 165 375

Dimensions – with Manual Control upgradeable to Command Remote

Coals Logs
Min* Max Min* Max
Width (mm) 230 556 230 556
Depth (mm) 160 319 165 375

*Trays with these dimensions will be supplied without legs

Note: The sizes above are given as a guide only and are subject to the actual shape required. There are strict regulations regarding the installation of all gas fires including custom-built models. In particular, some openings will require some form of canopy to be fitted in order to comply with BS5871 (Part 3). Your Gazco retailer will be able to advise you about sizes, shapes, regulations etc. and to answer any other questions you may have.

These products are not suitable for primary heating purposes.